How to use a polyester clothing sticker

  1. Iron the clothes for about 5-10 seconds to remove moisture and wrinkles. NOTE: Place a protective paper (baking paper) on the inside of the clothes so that the ink does not pass to the back of the garment.

  2. Place the paper/sticker with the printed side touching the fabric. Place the heat tape (green/yellow) on top of the sticker along the edges to secure the sticker to the clothing.
  3. Cover the sticker with baking paper or a cloth.
  4. Iron slowly for 60-90 seconds using rotating movements and press the sticker a little so that it adheres well. Temperature 180ºC-185ºC The iron normally has points for the temperature, we recommend between 2 points and 3 points, maximum 3 points if the clothing supports it.
  5. Remove the baking paper or cloth/fabric and when the sticker has cooled (after about 30-40 seconds) slowly peel it off to check if the ink has stuck well to the garment. If it has not stuck well, iron again on the side that has not stuck.

 

– Wash inside out in cold or lukewarm water (maximum 40 degrees)
– Do not bleach
– Iron the printed area on the reverse side or cover the sticker with baking paper and iron. When ironing for a long time or at a high temperature, be careful that the ink does not transfer to the other side of the garment.